Ovens  / Industrial/Shelf Ovens  / X2 Horizontal Air Flow Cabinet Oven  / X2-5-483648 
X2-5-483648 | X2 Horizontal Air Flow Cabinet Oven


X2 Horizontal Air Flow Cabinet Oven
X2-5-483648


  

Specifications

Oven Model X2-5-483648
Air Flow Full Horizontal
Maximum Temperature (F) 500
Maximum Temperature (C) 260
Work room W(in) 48
Work room D(in) 36
Work room H(in) 48
Outer Approximate W(in) 79
Outer Approximate D(in) 48
Outer Approximate H(in) 77
Capacity (cu.ft) 48
Recirc Fan (CFM) 1500
Recirc Motor(HP) 1
Electric Heat (kW) - Class A 30
Electric Heat (kW) - Class B 18
Fuel Heat (BTU/HR) 90,000
No of Swing Doors 2
Insulated Wall Thickness (in) 4
Approx Shipping Weight (lb) 1980

Optional Features
  • Oven stand - welded structural steel construction, will ship separate from oven
  • Extra shelves rated for 100#, 250# or 500# each
  • 304 stainless steel interior
  • Ramp-soak programmer
  • Digital cycle timers
  • Cycle alarms
  • Chart recorder
  • Door window 12 x 12
  • Interior light
  • Fresh air filter
  • Motorized dampers for quick cool down (fresh air and exhaust)
  • NEMA 12 control panel
  • Main disconnect switch mounted in control panel
  • Electric heated oven only – SCR or SSR power control
  Standard Features
  • Shelves Utility oven meets or exceeds NFPA-86, NFPA-70, OSHA & UL requirements
  • Factory wired shelf oven, tested with temperature survey and balanced before shipment
  • Quality components throughout
  • Ball bearing heavy duty hinges
  • Welded steel construction
  • Minimal interior/exterior metal-to-metal contact
  • Painted exterior
  • Reinforced steel doors
  • Gasketed door openings
  • FM approved pressure release door latches
  • Uniform temperature throughout oven
  • Adjustable louvered openings in supply and return ducts
  • Heavy duty blowers
  • Pre-wired NEMA 1 control cabinet with UL approved controls
  • Safety interlocks shut off heat if safety requirements are not ALL met
  • Digital indicating temperature controller
  • Solid state excess temperature controller
  • Heavy gauge temperature resistant aluminized steel interior
  • Oversized mineral wool insulation
  • Full horizontal air flow
  • Heavy duty, large diameter, Incoloy® sheathed, low watt density heating elements
  • One year limited warranty
  • Dampered exhaust port
  • Modulating burner for fuel heated units
  • Adjustable shelf rails on 3" centers
  • Two shelves rated for 100# each
  • Class "A" Ovens only: Exhaust fan and purge timer where volatile, toxic or undesirable fumes are present
 
 
1625 West Lake Shore Dr., Woodstock, IL 60098  /  Phone: 800 338-0079  /  Fax: 815 338-2960  /  pqsales@precisionquincy.com
 
® 2012 Precision Quincy Corporation. All rights reserved  /  Sitemap Website by Excelify
 

Ask The Expert!
Name:

Company:

Email:

Phone:

Question:
Submit Ask The Expert Form

FABTECH RSSI American Short Line Railroad AssociationNATE - National Association for Tower Erectors NFPA Logo UL logo CCAI - Chemical Coaters Association International ACMA ASTM International Member Powder Coating Institute Powder Coated Tough