Ovens  / Lab Ovens  / Laboratory Oven  / 49C-650D 
49C-650D | Laboratory Oven (exterior)
49C-650D | Laboratory Oven (interior)


Laboratory Oven
49C-650D


  

Specifications

Oven Model 49C-650D
Air Flow Full Horizontal
Maximum Temperature (F) 650
Maximum Temperature (C) 343
Work room W(in) 32
Work room D(in) 18
Work room H(in) 18
Outer Approximate W(in) 63
Outer Approximate D(in) 29
Outer Approximate H(in) 51
Capacity (cu.ft) 6
Recirc Fan (CFM) 530
Recirc Motor(HP) 0.5
Electric Heat (kW) - Class A 10
Electric Heat (kW) - Class B 6
Fuel Heat (BTU/HR) N/A
No of Swing Doors 1
Insulated Wall Thickness (in) 4
Approx Shipping Weight (lb) 1050

Optional Features
  • Double oven only; oven stand, welded together construction, will ship attached to double lab oven
  • Extra shelves (rated for 35# each)
  • Ramp soak programmer
  • Digital cycle timers
  • Cycle alarms
  • Chart recorder
  Standard Features
  • Laboratory Oven meets or exceeds NFPA-86, NFPA-70, OSHA & UL requirements
  • Factory wired, tested with temperature survey and balanced before shipment
  • Quality components throughout
  • Ball bearing heavy duty hinges
  • Welded steel construction
  • Minimal interior/exterior metal-to-metal contact
  • Reinforced steel doors
  • Gasketed door openings
  • Uniform temperature throughout oven
  • Adjustable air circulation
  • Heavy duty blowers
  • Pre-wired NEMA 1 control cabinet with UL approved controls
  • Safety interlocks shut off heat if safety requirements are not ALL met
  • Digital indicating temperature controller
  • Solid state excess temperature controller
  • Powder paint exterior lab oven
  • TWO year limited warranty
  • 304 stainless steel interior for corrosion resistance and ease of clean up
  • Oversized mineral wool insulated all six sides
  • Pressure relief panel
  • Full horizontal air flow
  • Heavy duty, large diameter, Incoloy® sheathed, low watt density heating elements
  • Two shelves (rated for 35# each) adjustable on 2" centers
  • Long life solid state contactor for precise temperature control
  • Back-up contactors for over temperature protection
  • Class "A" Ovens only: Exhaust fan where volatile, toxic or undesirable fumes are present
  • Ovens available in 208 or 230-1-60 voltage
 
 
1625 West Lake Shore Dr., Woodstock, IL 60098  /  Phone: 800 338-0079  /  Fax: 815 338-2960  /  pqsales@precisionquincy.com
 
® 2012 Precision Quincy Corporation. All rights reserved  /  Sitemap Website by Excelify
 

Ask The Expert!
Name:

Company:

Email:

Phone:

Question:
Submit Ask The Expert Form

FABTECH RSSI American Short Line Railroad AssociationNATE - National Association for Tower Erectors NFPA Logo UL logo CCAI - Chemical Coaters Association International ACMA ASTM International Member Powder Coating Institute Powder Coated Tough